Offshore shipping containers are widely used for the transportation and hoisting of goods or equipment between offshore facilities and ships in harsh environments with high temperature, high humidity, and high salt spray. Therefore, there are extremely high requirements for the anti-corrosion of the surface of the offshore container.
The coating process steps of TLS are as follows:
1. Preprocessing
Remove the oxide scale, rust, grease, dirt, and other attachments on the surface of the exposed steel structure to ensure the anti-corrosion performance of the coating; zinc-rich primers are applied automatically on the assembly line after the steel is shot-blasted. It temporarily protects the surface of freshly shot steel, preventing it from rusting in the gaps made during the container's manufacture.
2. Shot-blasted the whole container
Before painting, the surface of the weld and the heat sensitive area of the weld should be shot-blasted. The surface of the steel structure should be free of burrs, bumps, dust, dirt, no painting, sharp edges, and all rough-cut edges should be ground to a radius of at least 2mm;
3. Pre-coating
Pre-coating is applied to areas that are not easy to coat, including, but not limited to, the edges of steel plates, welds, corners, bolt holes, beam edges, and other areas that are difficult to paint.
4. Spray
Each coat should be applied evenly over the entire surface, and defects such as missing paint, sags, and drips must be avoided. And each coating should contain no pinholes, blisters, and leaks.
5. Drying: Speed up the curing process.
TLS uses environmentally friendly water-soluble paints, and the coating operators have relevant technical certifications. TLS containers are not prone to corrosion, paint failure, fading and discoloration which can make the container work better for its use value.
The coating process steps of TLS are as follows:
1. Preprocessing
Remove the oxide scale, rust, grease, dirt, and other attachments on the surface of the exposed steel structure to ensure the anti-corrosion performance of the coating; zinc-rich primers are applied automatically on the assembly line after the steel is shot-blasted. It temporarily protects the surface of freshly shot steel, preventing it from rusting in the gaps made during the container's manufacture.
2. Shot-blasted the whole container
Before painting, the surface of the weld and the heat sensitive area of the weld should be shot-blasted. The surface of the steel structure should be free of burrs, bumps, dust, dirt, no painting, sharp edges, and all rough-cut edges should be ground to a radius of at least 2mm;
3. Pre-coating
Pre-coating is applied to areas that are not easy to coat, including, but not limited to, the edges of steel plates, welds, corners, bolt holes, beam edges, and other areas that are difficult to paint.
4. Spray
Each coat should be applied evenly over the entire surface, and defects such as missing paint, sags, and drips must be avoided. And each coating should contain no pinholes, blisters, and leaks.
5. Drying: Speed up the curing process.
TLS uses environmentally friendly water-soluble paints, and the coating operators have relevant technical certifications. TLS containers are not prone to corrosion, paint failure, fading and discoloration which can make the container work better for its use value.
As drilling has become more complex, logging has had to adapt and improve as the number of horizontal and directional wells drilled has increased. Measurement with drilling (or MWD) is a type of logging that combines a measurement tool into the drill column and provides real-time information to help with steering the drill.
When drilling quite precise wells, MWD can provide drilling engineers with real-time information to make important decisions while drilling.
Due to the environmental factors in the exploration area, TLS can provide MWD cabin to ensure that MWD work is carried out safely and effectively. To provide a safe and healthy working environment, the TLS MDW cabin has the following standard specifications:
When drilling quite precise wells, MWD can provide drilling engineers with real-time information to make important decisions while drilling.
Due to the environmental factors in the exploration area, TLS can provide MWD cabin to ensure that MWD work is carried out safely and effectively. To provide a safe and healthy working environment, the TLS MDW cabin has the following standard specifications:
- Description: A60 rated, Zone1/Zone2 cabin (for offshore application)
- External dimension: Customized sizes
- Structural Rating: DNV 2.7-1/EN12079
- Hazardous Area Classification: Zone1/Zone2
MWD cabin was well packed for delivery
When the container is in automatic mode, the system will display different detection states for different detection conditions.
- When alarm for Gas low concentration(≥10%LEL: < 15%LEL) and H2S low concentration (≥8pprn: < 20ppm) and H2 low concentration(≥10%LEL; <15%LEL) and O2 low concentration(≤19%), the corresponding indicator light of "gas/H2S/H2 low concentration alarm indication" and "O2 leak alarm indication" is on; Explosion-proof sound and light will alarm; the fan will keep running and the air change timing is suspended
- When alarm for low differential pressure(<50Pa), Sound and light alarm will be sent out after 10s delay, and the indicator light of ”pressure loss alarm" will be on; If the differential pressure is restored within 60s, the ” pressure loss alarm” indicator light will be off, the alarm will be relieved and the ventilation process will continue; After 60 seconds, the fan power supply will be cut off, the ventilation process will stop, sound and light alarm, unable to enter the ”safe power supply” state.
- When alarm for Gas (≥15%LEL: <60%LEL) / H2S( ≥20ppm)/ H2 (≥ 15%LEL) high concentration , and fire alarm (smoke detector、heat detector、MCP) and local ESD signal will be received, the power supply of the fan will be cut off, and the ventilation process will stop.
TLS is an international supplier that can customize onshore | offshore special containerised solutions,Any requirements, please contact us directly:
E-mail: sales@tls-containers.com
Hotline: +65-65637288; +65-31386967
E-mail: sales@tls-containers.com
Hotline: +65-65637288; +65-31386967