CPFG Systems offers a range of systems, together with Remote I/O manufacturers, suitable for hazardous and safe areas, either as a combination of both, or as zone of operation specific systems.
- Designed to be user friendly.
- Significant cost savings in hardware and wiring.
- Reduced cabling.
- Reduced cabling consumption (ducts, seals, penetrations, etc.).
- Reduced on-site installation time for personnel.
- Factory acceptance testing of systems.
- Reduced design time.
- Reduced on-site maintenance.
- No need for local instrumentation to aggregate signals.
Visual inspection and non-destructive testing are commonly used to inspect container welds. Magnetic particle inspection is one of the types of non-destructive testing. Magnetic particle inspection is a method of observing defects using magnetic powders as a display medium. After the ferromagnetic material workpiece is magnetized, as the existence of discontinuity, the magnetic field lines on the surface and near the surface of the workpiece are locally distorted to generate a leakage magnetic field, which adsorbs the magnetic powder applied on the surface of the workpiece and forms a visible magnetic field under suitable illumination,and the location, size, shape, and severity of the discontinuities are shown.
TLS normally uses black magnetic paste for flaw detection. This method has high sensitivity to detect small defects on the surface of the workpiece. The steps are:
Any requirements about specialized shipping containers, please feel free to contact us.
TLS normally uses black magnetic paste for flaw detection. This method has high sensitivity to detect small defects on the surface of the workpiece. The steps are:
- Pour and spray the magnetic levitation over the workpiece to be examined, and the flow rate of the levitation should be slow to prevent the magnetic imprints from being washed away.
- Use a fixed device. It is easy to operate and has high efficiency.
- Demagnetization. Reduce residual magnetism in the inspected workpiece so that it can be processed or used normally.
- After magnetic particle inspection, residual magnetic levitation on the surface is removed and dried.Our QAs are all certified through strict examinations.
Any requirements about specialized shipping containers, please feel free to contact us.
For the functions of sea containers, such as transporting refrigerated, living or working, etc., it is necessary to carry out modifications to meet the requirements of thermal insulation and fire protection of the container. Normally, the sea land containers provided by TLS can comply with the A60 standard.
Classification society standard A60 level specific requirements:
What type of refractory material is A60 fireproof?
The material is required to have a certain rigidity and fire resistance for more than 1 hour, during which time the integrity is maintained to prevent the passage of smoke and flame.
Rock wool and ceramic fiber wool are two different materials, both of which can be used as insulation materials for A60 fire protection but must be approved by the relevant classification society.
Classification society standard A60 level specific requirements:
- Steel or equivalent material, the thickness is 4.5±0.5mm.
- Appropriate anti-flexion reinforcement, where the distance between the aggregates should be about 600 mm.
- Made of approved non-combustible materials, so that within 60 minutes, the average temperature rise of the backside does not exceed 140℃, and the temperature rise of any point on the backside does not exceed 180℃.
What type of refractory material is A60 fireproof?
The material is required to have a certain rigidity and fire resistance for more than 1 hour, during which time the integrity is maintained to prevent the passage of smoke and flame.
Rock wool and ceramic fiber wool are two different materials, both of which can be used as insulation materials for A60 fire protection but must be approved by the relevant classification society.