The energy storage system plays an increasingly important role in solving new energy consumption, enhancing the stability of the power grid, and improving the utilization efficiency of the power distribution system. arouse people's general attention.Its application scale is growing rapidly, and the safety of energy storage power stations has also attracted widespread attention.
There are three lines of defense for energy storage safety. The first is the material safety of the energy storage battery itself. The second is the fire protection design of the system, efficient thermal management, temperature control, early warning and intervention of thermal runaway, through BMS system linkage to cut off the power when thermal runaway occurs. The third is fire safety, effectively blocking the spread of energy storage battery fires, quickly cooling down and efficiently extinguishing fires, and preventing re-ignition.
The energy storage fire protection system is mainly composed of a detection part and a fire extinguishing part, which can realize the automatic detection, alarm and fire extinguishing protection functions of the protection zone or battery storage container. There are three common energy storage container fire protection systems on the market. One is the design idea of total submersion, which uses a gas fire extinguishing system to extinguish the fire; the second uses a gas fire extinguishing system + sprinkler; the third uses a Pack level fire extinguishing solution, and the solution is a fire extinguishing solution designed for each battery pack.
Total submersion
System composition: fire extinguishing device, detection system, fire extinguishing agent delivery pipeline
1.Fire extinguishing device: Usually, the energy storage container fire fighting system will choose the heptafluoropropane fire extinguishing system. Experiments have shown that if the lithium battery catches fire in a closed environment, heptafluoropropane can quickly extinguish the fire and will not re-ignite in a closed environment; ultra-fine dry powder can also quickly extinguish the fire and will not resume Combustion; carbon dioxide can quickly extinguish the fire, but it will re-ignition;
2.Detection system:For lithium battery energy storage containers, we usually design a variety of detectors, such as temperature, smoke, combustible gas, carbon monoxide, hydrogen and other detectors, to sense the fire, and activate the fire extinguishing device through a prefabricated algorithm.
3.Fire extinguishing agent delivery pipeline: When the energy storage container fire protection system uses pipe network type heptafluoropropane, special gas pipelines will be used. Usually, the electrical area and the energy storage area will be separated. The electrical area adopts a suspended fire extinguishing device, and the energy storage area adopts a pipe network for formula heptafluoropropane. Arranging multiple nozzles through the pipe network to the protected area can ensure the uniform spraying of the fire extinguishing agent.
Gas fire extinguishing system + sprinkler
Energy storage container fire system design gas fire extinguishing system, while installing sprinkler system, is considered to be the most comprehensive and economical solution in the case of scientific design.The initial fire can be suppressed in time, buying valuable time for the next personnel to deal with it. If the fire is very large, the sprinkler will also be triggered. If the water resources are relatively sufficient, the fire can be completely suppressed normally.If the water resources are insufficient, it can also buy more valuable time for personnel to deal with.When the energy storage container is installed in a remote outdoor area and there is no water resource, there should be an emergency plan on site, such as how to quickly remove the battery on fire, and how to quickly remove the battery on fire. These basic plans and corresponding equipment such as a forklift is a must.
Pack level fire extinguishing solution
It detects and protects each battery pack through composite detectors, pipeline solenoid valves, fire extinguishing device spot spraying and other technologies.The core value point is that electrical fires can be effectively monitored and suppressed at the initial stage.The cost of Pack-level fire extinguishing is relatively high. In energy storage scenarios with a relatively high risk factor, a targeted fire extinguishing scheme is designed.
The construction of the energy storage container fire protection system pays more attention to details. For example, the pressure relief port and emergency start and stop must have sealing measures. If the sealing is not good, there is a risk of short circuit;For example, sound and light and deflated lights must be protected against rain to reduce the risk of electrical short circuits.
There are three lines of defense for energy storage safety. The first is the material safety of the energy storage battery itself. The second is the fire protection design of the system, efficient thermal management, temperature control, early warning and intervention of thermal runaway, through BMS system linkage to cut off the power when thermal runaway occurs. The third is fire safety, effectively blocking the spread of energy storage battery fires, quickly cooling down and efficiently extinguishing fires, and preventing re-ignition.
The energy storage fire protection system is mainly composed of a detection part and a fire extinguishing part, which can realize the automatic detection, alarm and fire extinguishing protection functions of the protection zone or battery storage container. There are three common energy storage container fire protection systems on the market. One is the design idea of total submersion, which uses a gas fire extinguishing system to extinguish the fire; the second uses a gas fire extinguishing system + sprinkler; the third uses a Pack level fire extinguishing solution, and the solution is a fire extinguishing solution designed for each battery pack.
Total submersion
System composition: fire extinguishing device, detection system, fire extinguishing agent delivery pipeline
1.Fire extinguishing device: Usually, the energy storage container fire fighting system will choose the heptafluoropropane fire extinguishing system. Experiments have shown that if the lithium battery catches fire in a closed environment, heptafluoropropane can quickly extinguish the fire and will not re-ignite in a closed environment; ultra-fine dry powder can also quickly extinguish the fire and will not resume Combustion; carbon dioxide can quickly extinguish the fire, but it will re-ignition;
2.Detection system:For lithium battery energy storage containers, we usually design a variety of detectors, such as temperature, smoke, combustible gas, carbon monoxide, hydrogen and other detectors, to sense the fire, and activate the fire extinguishing device through a prefabricated algorithm.
3.Fire extinguishing agent delivery pipeline: When the energy storage container fire protection system uses pipe network type heptafluoropropane, special gas pipelines will be used. Usually, the electrical area and the energy storage area will be separated. The electrical area adopts a suspended fire extinguishing device, and the energy storage area adopts a pipe network for formula heptafluoropropane. Arranging multiple nozzles through the pipe network to the protected area can ensure the uniform spraying of the fire extinguishing agent.
Gas fire extinguishing system + sprinkler
Energy storage container fire system design gas fire extinguishing system, while installing sprinkler system, is considered to be the most comprehensive and economical solution in the case of scientific design.The initial fire can be suppressed in time, buying valuable time for the next personnel to deal with it. If the fire is very large, the sprinkler will also be triggered. If the water resources are relatively sufficient, the fire can be completely suppressed normally.If the water resources are insufficient, it can also buy more valuable time for personnel to deal with.When the energy storage container is installed in a remote outdoor area and there is no water resource, there should be an emergency plan on site, such as how to quickly remove the battery on fire, and how to quickly remove the battery on fire. These basic plans and corresponding equipment such as a forklift is a must.
Pack level fire extinguishing solution
It detects and protects each battery pack through composite detectors, pipeline solenoid valves, fire extinguishing device spot spraying and other technologies.The core value point is that electrical fires can be effectively monitored and suppressed at the initial stage.The cost of Pack-level fire extinguishing is relatively high. In energy storage scenarios with a relatively high risk factor, a targeted fire extinguishing scheme is designed.
The construction of the energy storage container fire protection system pays more attention to details. For example, the pressure relief port and emergency start and stop must have sealing measures. If the sealing is not good, there is a risk of short circuit;For example, sound and light and deflated lights must be protected against rain to reduce the risk of electrical short circuits.
Written by Mandy
A pressurized MCC (motor control center) shelter is a type of equipment used to house and protect electrical equipment, specifically motor control centers, in environments where there may be a risk of explosion or other hazards that could damage the equipment. These shelters are typically made of metal or other durable materials and are designed to withstand high pressures and temperatures. They are often used in oil and gas facilities, mines, and other industrial settings. Inside the pressurized MCC shelter, the air pressure is regulated and maintained at a level higher than the surrounding atmosphere, which helps to prevent the ingress of explosive gases or dust. This helps to ensure the safety of the electrical equipment and personnel working near the shelter.
A pressurized MCC shelter typically includes a variety of features to ensure the safe and efficient operation of the electrical equipment it contains. These may include ventilation systems to maintain proper air flow and temperature, as well as lighting and power systems to ensure that the equipment can be safely operated at all times. The shelter may also be equipped with fire suppression systems, emergency shut-off valves, and other safety features to help prevent accidents and protect personnel in case of an emergency.
Pressurized MCC shelters also feature a pressurization system which maintains a positive pressure inside the shelter and prevents the ingress of flammable gases and dust. The pressurization system typically includes air filters and a blower to ensure that the air inside the shelter is clean and free from contaminants.
The pressurized MCC shelter is designed to be durable and long-lasting, and can be customized to meet the specific needs of the facility in which it is installed. This may include the use of special materials and coatings to protect the shelter from corrosive environments, as well as the inclusion of additional features such as security systems to protect the equipment and personnel inside.
Overall, pressurized MCC shelter is a critical piece of equipment for protecting electrical equipment in hazardous environments. It not only helps to ensure the safety of the equipment and personnel, but also helps to prolong the life of the equipment and reduce maintenance costs.
A pressurized MCC shelter typically includes a variety of features to ensure the safe and efficient operation of the electrical equipment it contains. These may include ventilation systems to maintain proper air flow and temperature, as well as lighting and power systems to ensure that the equipment can be safely operated at all times. The shelter may also be equipped with fire suppression systems, emergency shut-off valves, and other safety features to help prevent accidents and protect personnel in case of an emergency.
Pressurized MCC shelters also feature a pressurization system which maintains a positive pressure inside the shelter and prevents the ingress of flammable gases and dust. The pressurization system typically includes air filters and a blower to ensure that the air inside the shelter is clean and free from contaminants.
The pressurized MCC shelter is designed to be durable and long-lasting, and can be customized to meet the specific needs of the facility in which it is installed. This may include the use of special materials and coatings to protect the shelter from corrosive environments, as well as the inclusion of additional features such as security systems to protect the equipment and personnel inside.
Overall, pressurized MCC shelter is a critical piece of equipment for protecting electrical equipment in hazardous environments. It not only helps to ensure the safety of the equipment and personnel, but also helps to prolong the life of the equipment and reduce maintenance costs.
The ultra-wide offshore lab container for Petrobras is a specialized piece of equipment designed for use in the oil and gas industry. It is specifically designed to be used in offshore environments, such as on oil rigs or platforms, where space is limited and the conditions are harsh. The container is ultra-wide to provide more space for laboratory equipment and personnel, and is built to withstand the extreme conditions of the offshore environment, such as high winds, saltwater corrosion, and extreme temperatures.
The container is equipped with various features to ensure the safe and efficient operation of the laboratory equipment it contains. These may include ventilation systems to maintain proper air flow and temperature, as well as lighting and power systems to ensure that the equipment can be safely operated at all times. It may also be equipped with fire suppression systems, emergency shut-off valves, and other safety features to help prevent accidents and protect personnel in case of an emergency.
The container is also designed to be easily transportable and can be easily moved from one location to another, making it ideal for use on multiple offshore platforms. It can also be customized to meet the specific needs of the facility in which it is installed, such as the use of special materials and coatings to protect the container from corrosive environments.
Overall, the ultra-wide offshore lab container for Petrobras is a critical piece of equipment for conducting laboratory work in offshore environments. It not only helps to ensure the safety of the equipment and personnel, but also helps to improve the efficiency of laboratory operations and reduce maintenance costs.
The container is equipped with various features to ensure the safe and efficient operation of the laboratory equipment it contains. These may include ventilation systems to maintain proper air flow and temperature, as well as lighting and power systems to ensure that the equipment can be safely operated at all times. It may also be equipped with fire suppression systems, emergency shut-off valves, and other safety features to help prevent accidents and protect personnel in case of an emergency.
The container is also designed to be easily transportable and can be easily moved from one location to another, making it ideal for use on multiple offshore platforms. It can also be customized to meet the specific needs of the facility in which it is installed, such as the use of special materials and coatings to protect the container from corrosive environments.
Overall, the ultra-wide offshore lab container for Petrobras is a critical piece of equipment for conducting laboratory work in offshore environments. It not only helps to ensure the safety of the equipment and personnel, but also helps to improve the efficiency of laboratory operations and reduce maintenance costs.