TLS news & blogs

As a type of modular building, the container accommodation is manufactured in the factory, transported to the project site and installed on site. When the module leaves the factory, all interior basic decoration has been completed, including the whole bathroom and kitchen facilities, etc. After installation, customers can check in with their bags.
TLS Offshore Containers International has supplied offshore module solutions since 1995, which is produced according to DNV 2.7-1 / EN12079, A60 fire-rated insulation.

FEATURE
SUSTAINABILITY
Compared with traditional construction methods, the off-site construction process itself avoids the impact of site construction on the environment and noise pollution. Many materials and components can be reused after assembly.
 
EFFICIENT
Convenient installation, greatly shortens the construction period. At the same time, it can also eliminate the influence of weather and seasonal changes on the site construction period, so that the construction can be put into use as soon as possible.
 
SAVE INVESTMENT
Effectively shortens the construction period and capital occupation time, avoids premature accumulation of capital, saves investment capital and opportunity cost.
 
PRODUCT DIVERSIFICATION.
We can provide containerized accommodation solutions according to our customers' requirements and experience.

The container lab is a kind of self-contained and movable module that fully meets the requirements of the laboratory. The laboratory container is fully insulated and can operate in extreme weather conditions. It is completely independent and has the necessary compressed air, lighting, and ventilation systems. It can be customized to the customer's needs.

FEATURE

• Low cost: easy to install, the cost is much lower than ordinary laboratory
• Convenient transportation: Fully certified to meet international shipping requirements, can be designed for 20 ft or 40 ft containers.
• Comfortable and safe: completely isolated from the outside, the indoor operating environment is very comfortable in a harsh environment.
• Highly customized: We will combine the needs of our customers with the design suggestions of our experienced in-house laboratory staff to create a highly customized laboratory container that meets the needs of our customers

20 ft laboratory container rated for Safe zone (negative pressure)

• standard 20 ft HC container dimensions (6058*2438*2896mm)
• Lifting points: 4pcs recessed pad eyes
• Recess: full height recess for Air-con compressor and electrical penetrations
• A60 walls, ceiling and flooring
• Water inlet / outlet connection
• Compressed air connection
• With ventilation system to renew air in the laboratory 6 times per hour in normal operation and 20 times per hour in case of emergency

Internal Fitment:

• Workbenches - (anti-acid material) including drawers cabinet
• Overhead cabinet
• Eyewash
• Fume hood - Ex type (with Ex exhaust fan, Ex lighting, Ex switch, Ex sockets)
• Fire detection system (including heat detector and smoke detector) 
• Gas detection CH4 and H2S
• Compressed air connection and Nitrogen connection
• Portable fire extinguisher

Electrical:

• Electrical supply external supply system designed for Safe Area. 
• Electrical equipment inside the laboratory to be rated explosion proof
• Control panel - Ex type (automatically response when fire, smoke, toxic gas or flammable gas occur)
• Ex Lighting - 3 pcs (1pc emergency light with battery, Ex-type)
• Ex sockets (220V 3 PIN European style), 5 pcs
• MCT (1 pc, Roxtec)
• Emergency shutdown - Ex type
• Exhaust fans (1pc installed inside fume hood, 1pc installed outside) - Ex type
• Phone and network cabling

Air conditioning

• One Split Type AC unit - Ex Type (working temperature -20°C / +50°C, T3), 24000BTU

Applicable Codes and Standards

• Bureau Veritas or other major IACS Classification Societies

A pressurised MCC container was delivered and installed in a FPSO. 

TLS temporary refuge equipped with independent gas supply system, when gas pollution occurs outside, a gas circulation system is formed inside TR, which effectively protects internal personnel from toxic gas hazards.
The compressed air bottle is used as the source of breathing gas to ensure the normal breathing of internal personnel while maintaining a slight positive pressure inside, which can effectively prevent toxic gas from entering the interior of the refuge;
The special CO2 absorption device can effectively adjust the CO2 adsorption rate and keep the CO2 content within a reasonable range;
Compared with the traditional filter protection method, the independent air supply system has the advantages of less maintenance, more stable and safer.
Below production process photos for reference,  Find more info for your potential project.