Image description
A hazardous area can be defined as any location where there is risk of an explosion. But every hazardous area is different and each has specific requirements depending on the nature of the atmosphere and the elements that are present.
Fundamentally, for an explosion to take place, flammable or explosive gases, vapours, mists or dusts will be present. Then, the level of risk of an explosion is based on the frequency and duration of the occurrence of an explosive atmosphere. This level of risk is represented by classifying the hazardous area as Zone 0, Zone 1 or Zone 2 (for gas, vapour and mist atmospheres) or Zone 21 or Zone 22 for dust atmospheres.
we will look at what defines Zone 0, Zone 1 and Zone 2 hazardous area classifications and the considerations for specifying lighting into each area. But first, we must consider what is likely to cause an explosion in the first place.
There are three necessary components for an explosion to occur;
1. Flammable Substance – this needs to be present in a relatively high quantity to produce an explosive mixture (e.g. gas, vapours, mists and dusts).
2. Oxygen – oxygen is required in high quantities and in combination with the flammable substance to produce an explosive atmosphere.
3. Ignition Source – a spark or high heat must also be present.

Where there is potential for an explosive atmosphere, special precautions are needed to prevent fires and explosions. Electronic equipment, including lighting, needs to be purpose designed for use in hazardous areas to prevent a spark occurring and igniting any flammable substances.
Although every application is different, for the ease of monitoring and specification each hazardous area is classified as a particular level or “zone”. As a result, all hazardous area equipment must be designed with hazardous area zone classifications in mind, as the “zone” governs the level of protection and precaution required. It is essential to know which zone you are working in, so that you can specify the most appropriate equipment.
For gases, vapours and mists the zone classifications are recognised as Zone 0, Zone 1 and Zone 2 areas. Let’s take a look at what defines each zone…
  1. Zone 0 is an area in which an explosive atmosphere is present continuously for long periods of time or will frequently occur.
  2. Zone 1 is an area in which an explosive atmosphere is likely to occur occasionally in normal operation. It may exist because of repair, maintenance operations, or leakage.
  3. Zone 2 is a place in which an explosive atmosphere is not likely to occur in normal operation but, if it does occur, will persist for a short period only. These areas only become hazardous in case of an accident or some unusual operating condition.
Image description
1. Basic frame
The base frame consists of two (2) lower side rails, several cross members and a gooseneck tunnel, which are welded together as a subassembly.
 
2.Front End
The front end will be composed of corrugated end wall and front end frame,
which are welded together as a sub-assembly.    
 
3. Rear End 
Rear end is composed of Rear End Frame which consists of one door sill, two
corner posts, one rear header with header plate and four corner fittings, which
are welded together as a sub-assembly, and Door Systems with locking
devices.
 
4.Side Wall Assembly
Side Walls Each side wall will be composed of a number of sheets for the intermediate (inner) parts and outer panels at each end of side wall, fully vertically corrugated into trapezium section, butt welded together to form one panel by automatic welding. 
 
5.Roof
The roof will be constructed by several die-stamp corrugated steel sheets with a certain upwards camber at the center of each trough and corrugation, these sheets are butt jointed together to form one panel by automatic welding. 
 
 



Difference Between Onshore ISO and Offshore DNV Shipping Containers

In order to meet the certification necessary for both safety and security, onshore and offshore containers need to be built properly with corresponding appropriate types of materials. Onshore and offshore shipping containers are just two of the different types of containers available today. There is a need to know that each container type has its specific uses so that you can decide the most appropriate one for your project needs. A shipping container is a vehicle used to hold out cargos for storage and safekeeping.
 
Onshore ISO Shipping Containers
Most of the ISO shipping containers sometimes also known as sea containers are made from the weathering steel as what is specified within the BS EN 100025-5: 2004 commonly called as the “Cor-ten” steel, This is a type of steel that is corrosion resistant mainly utilized within different industries in which exposed steel sections are needed such as building sculptures, facades, and panels. Used shipping containers for sale are widely available in order to cater the growing needs of the industry.
Onshore ISO shipping containers are containers that passed through the standards of the International Standards Organization. This sort of container is also referred to as “intermodal”. The intermodal or ISO shipping container originated or rooted to develop the DNV offshore containers. It is the reusable transport and storage of goods between locations at a low cost. There are great numbers of companies that offer cheap shipping containers for sale that the industry can choose from.
Components and Characteristics of Onshore ISO Shipping Containers
  • Gooseneck tunnel
  • Forklift pockets
  • Grappler pockets
  • Purin reinforced with a plywood floors
  • Corner castings
  • Monocoque body
  • Continuously all-weeded steel
  • Steel that is corrugated with sheet sidewalls, back panel, and roof
 
Offshore DNV Shipping Containers
Offshore container as defined by the International Maritime Organization, it is a “portable unit, specially designed for repeated use in the transport of goods or equipment to, from or between fixed and/or floating offshore installations and ships.” It is also refer to as portable tanks for dangerous goods. Hence, it holds oils, gases and other hazards that need transport from one place to another.
 
What makes Offshore Containers Different from Onshore Containers?
  • the lifting pad eye (lifting lugs) – most common differentiation between onshore and offshore containers
  • Designed for a dynamic lifting via padeyes
  • DNV certified lifting sling mainly equipped with the shackles
  • Primarily inspected right at design stage, production, material procurement, as well as final load
  • NDE Tested
  • Not only a prototype tested, but also a specified number of the randomly selected units from the batch are mainly tested at rate which is typically five minutes the ISO shipping containers’ testing rate.
  • The weight is about twice the size of ISO containers
  • Required to have an identified DNV lifting sling certificate
 
Offshore DNV shipping containers are containers manufactured that passed through dnv2.7-1 certifications. These containers are often left expose and loaded in harsh weather conditions. It normally specifies with a standard temperature of -20 degrees Celsius and requires primary structures and materials with sufficient strength and sturdiness with its standard temperature. The loading and unloading methods put different types of pressure on the structure of the containers.

 lifting pad eye

the lifting pad eye (lifting lugs) – most common differentiation between onshore and offshore containers