A custom MCC enclosure is a prefabricated containerized room for Motor Control Center panels and related electrical or automation equipment Depending on the project, it may house MCC panels, PLC cabinets, variablefrequency drives, switchgear, control panels and auxiliary systems
TLS configures the enclosure around the equipment layout, operating environment, site interfaces and required project standards It can be supplied as a prepared enclosure or with selected internal systems installed before delivery Positive pressure, fire protection and hazardousarea features are projectspecific options, not standard requirements for every MCC enclosure
What Does an MCC Enclosure Provide?
The enclosure provides a defined space that can:
- support and protect installed equipment;
- provide space for operation and maintenance;
- organize cable entry and internal routing;
- maintain the required internal environment;
- provide interfaces for site power, control and communication systems; and
- allow more work to be completed before the unit reaches the site
It does not replace the MCC equipment; it provides the space in which that equipment is installed and operated
How Is the Structure Configured?
TLS can adapt the enclosure structure to the equipment and installation conditions Configurable items may include:
- overall dimensions and internal layout;
- equipment supports and reinforced floor areas;
- antislip or antistatic flooring;
- doors and service access;
- cableentry openings and penetration locations;
- external connection points;
- lifting and transport features; and
- corrosionprotection system
Coating requirements are selected for the intended environment C4 or C5 systems may be specified where appropriate
Equipment weights, cabinet positions and service clearances are coordinated during design so that structural supports, openings and access arrangements match the selected equipment
How Are Temperature and Airflow Managed?
MCC panels, VFDs and other electrical equipment release heat, so the enclosure may require ventilation, air conditioning or another cooling arrangement
Available provisions can include:
- ventilation openings and air ducts;
- mounting points and cutouts for air conditioners;
- heatexchanger interfaces;
- louvers, rain hoods and dust filters; and
- insulated walls and ceilings
The final arrangement depends on equipment heat output, outdoor conditions and the permitted internal temperature
What Can Be Prepared for Electrical Installation?
An MCC enclosure can be prepared as an equipmentintegration platform rather than delivered as an untreated empty shell Depending on the agreed supply scope, TLS can provide:
- equipment mounting bases;
- cable trays and routing paths;
- floor or wall cable entries;
- lighting and internal power distribution;
- earthing provisions;
- equipment labels and interface identification; and
- space for customerinstalled panels and auxiliary systems
Early coordination of cabinet dimensions and cable routes helps ensure that trays, openings and access areas are positioned for the actual equipment The MCC panels may be installed by TLS, the customer or another system integrator, depending on the contract
Can an MCC Enclosure Be Used in a Hazardous Area?
Yes, when it is specifically designed and approved for that application TLS has supplied pressurized MCC shelters for hazardousarea projects, including Zone 2 applications
A hazardousarea MCC shelter may require positivepressure ventilation, gas detection, alarms, shutdown functions, firerated construction and suitable external electrical equipment The exact protection concept depends on the area classification, equipment installed inside and applicable project requirements
A standard MCC enclosure does not become suitable for Zone 1 or Zone 2 simply by adding a fan Pressurization and explosionprotection features must be treated as a coordinated system and verified under the required compliance basis
What Can Be Completed Before Delivery?
Factory prefabrication can include structural fabrication, coating, internal flooring, equipment supports, cable trays, openings, lighting, ventilation components and other agreed systems Work completed in the factory can reduce the amount of fabrication and assembly required at the project site
The delivery level is flexible Common scopes may include:
|
Delivery scope |
Typical content |
|
Prepared enclosure |
Structure, coating, flooring, openings and equipment supports |
|
Partially fitted module |
Prepared enclosure plus selected electrical, HVAC or safety systems |
|
Integrated MCC module |
Enclosure with project-defined equipment and systems installed and tested within the agreed scope |
These descriptions explain possible delivery levels; they are not fixed TLS packages Site foundations, external utilities, field connections and commissioning responsibilities remain subject to the project contract
Where Are MCC Enclosures Used?
Containerized MCC rooms can provide permanent or relocatable electricalcontrol space for oil and gas facilities, offshore platforms, chemical plants, energy projects, mines and remote industrial sites
FAQ
1. Is every TLS MCC enclosure pressurized?
No Pressurization is used when required by the installation environment and project protection concept
2. Does an MCC enclosure include the MCC panels?
It can, but not necessarily TLS can supply a prepared enclosure or support a more integrated delivery scope, depending on the contract
3. Can the layout be customized?
Yes Dimensions, cabinet arrangement, doors, cable entries, flooring, HVAC provisions and other interfaces can be configured for the project
4. Does a prefabricated MCC enclosure eliminate all site work?
No Prefabrication can reduce site work, but foundations, external connections, installation checks and commissioning may still be required
Conclusion
A TLS custom MCC enclosure is a configurable containerized space for MCC panels and related control equipment Its structure, coating, flooring, cable routes, environmental control and safety systems are selected for the actual application The product can range from a prepared enclosure to an integrated module, while hazardousarea and positivepressure features are included only when required by the project.
Product brochures:
