Unlike ordinary dry cargo containers, which are primarily used for land transportation, offshore containers are specialized containers used on offshore oil rigs;  Therefore, there is a well-established set of European standards for their design and manufacture, including DNV 2.7-1 and EN 12079.
Marine containers are mainly used on marine drilling platforms, where the operating environment is demanding and frequent hoisting is required, which places high requirements on container hoisting equipment.
All four corners of the top of the container have a top corner piece structure. The top corner piece structure consists of a standard container top corner piece, a lifting lug, and a reinforcing piece.
The uplifted ears are located on the inner side of the top horn, adjacent to it, and are arranged and fixed to it. The four-point or two-point lifting of a container can be performed by means of a hoist, and therefore there is a higher strength requirement on the hoist itself as well as on the top of the box in which the hoist is mounted. The lifted lug material must have low-temperature shock resistance properties.
The reinforcing piece consists of a bottom plate for the lifting lug, and a coaming plate arranged on three sides of the bottom plate of the lifting lug. The setting of the coaming plate not only strengthens the lifting ear area but also protects the lifting ear.
When lifted, a special sling is used, the shackles are passed through the eye holes and locked firmly, then the sling is lifted through the main ring of the sling.
LIFTING PAD EYE FOR OFFSHORE
Large-scale power storage technology is the key technology for smart grid, new energy generation and grid connection, power load shifting and valley filling. Lithium-ion batteries have been widely used in many fields due to their high energy density, low self-discharge rate, smooth discharge voltage, long cycle life and other advantages, and the application of lithium batteries in large-scale power storage systems will become an inevitable trend in technology development. In order to ensure the efficient and safe application of lithium-ion solar battery storage (Battery Energy Storage System, BESS), all components of the system must be integrated and optimized, and managed and controlled in a reasonable and effective manner.
 
The battery management technology and system integration technology of energy storage systems can be developed to improve the safety, reliability and service life of the battery system and promote the popularization and application of large-scale power storage. The key technologies include:
(1) advanced battery management technology ;
(2) temperature monitoring and management technology;
(3) state of health (SOH) monitoring technology;
(4) system integration technology.
solar power energy storage systems
Intelligent pressurized containers can provide a safe environment for equipment and people in hazardous areas. The principle of a positive pressure EX-proof cabin is to achieve the technical requirements of blast-proofing through enclosure. A positive pressure ventilation system is the key.
It delivers fresh air from a safe area to the container through ducts that pure the air inside the container and maintain a slightly higher air pressure inside the container than outside. In this condition, no harmful gas can enter the enclosure.
If the blast control system detects the presence of hazardous gases in the enclosure or fails to maintain positive pressure, the alarm system will sound an alarm and issue a warning. If the control conditions inside the container are still not required within the specified time, the non-explosive device will automatically cut off.
Thus, the common equipment in the container fulfils the purpose of blast protection.
positive pressure EX-proof cabin