Category: Offshore Workshop Container

ARE YOU LOOKING FOR A WORKSHOP CONTAINER SIMILAR AS BELOW?

12/31/2021

The container lab is a kind of self-contained and movable module that fully meets the requirements of the laboratory. The laboratory container is fully insulated and can operate in extreme weather conditions. It is completely independent and has the necessary compressed air, lighting, and ventilation systems. It can be customized to the customer's needs.

The container described herein is designed for offshore containers, and is suitable for the environmental conditions imposed by these modes of transport for the carriage of general cargo by road, rail and sea (above or below deck).

All materials used in the construction will be to withstand extremes of temperature range from -20 ℃ to +60 ℃ without effect on the strength of the basic structure and watertightness.

Please download workshop container, lab container brochure for reference.

fume cupboard in pressurized shipping container

20HC offshore lab container, dnv2.7-1, csc plated, negative pressurisation, atex applied

12/30/2021

DNV2.7-1, CSC PLATED, NEGATIVE PRESSURISATION

20HC offshore laboratory containers were designed and manufactured according to client's specific requirement.

Features

DNV2.7-1 / EN12079 certification
CSC plated
A60 fire rating
An autonomous fire, gas and smoke detection system.
A self‐contained Heat, Ventilation and Air Conditioning (HVAC) system, with fast-plug connection to rig power supply system
Water supply system with connections to rig supply system
Experiment hood with exhaust fan, negative pressurisation
Lab bench
Work desk with phone connection possibilities, computer and Local Area Network (LAN) access.
Working and storage furniture
Stainless steel sink unit with raised edge, large sink and drainage area.
Under bench and over bench cabinets for storage of consumables.
Classified for zone 2 hazardous area on request.
Zone 2 electrics and lighting on request.
Anti-slip flooring
Ex light, switch, socket, cabling
Quick and easy hook up to on-board services
Designed for easy stacking
Compliant with ATEX, IECEx standard on request.

What is the CHARACTERISTICS of offshore laboratory container|testing lab container|mobile workshop container|shipping container laboratory|lab package?

9/14/2021

Low cost: easy to install, the cost is much lower than ordinary laboratory
Convenient transportation: Fully certified to meet international shipping requirements, can be designed for 20 ft or 40 ft containers.
Comfortable and safe: completely isolated from the outside, the indoor operating environment is very comfortable in a harsh environment.
Highly customized: We will combine the needs of our customers with the design suggestions of our experienced in-house laboratory staff to create a highly customized laboratory container that meets the needs of our customers

offshore lab container, equipment container, offshore testing laboratory container, workshop container, laboratory container, according to dnv2.7-1 standard, negative pressure lab container

8/19/2021

20 ft laboratory container rated for Safe zone (negative pressure)

standard 20 ft HC container dimensions (6058*2438*2896mm)
Lifting points: 4pcs recessed pad eyes
Recess: full height recess for Air-con compressor and electrical penetrations
A60 walls, ceiling and flooring
Water inlet / outlet connection
Compressed air connection
With ventilation system to renew air in the laboratory 6 times per hour in normal operation and 20 times per hour in case of emergency

Internal Fitment:

Workbenches - (anti-acid material) including drawers cabinet
Overhead cabinet
Eyewash
Fume hood - Ex type (with Ex exhaust fan, Ex lighting, Ex switch, Ex sockets)
Fire detection system (including heat detector and smoke detector)
Gas detection CH4 and H2S
Compressed air connection and Nitrogen connection
Portable fire extinguisher

Electrical:

Electrical supply external supply system designed for Safe Area.
Electrical equipment inside the laboratory to be rated explosion proof
Control panel - Ex type (automatically response when fire, smoke, toxic gas or flammable gas occur)
Ex Lighting - 3 pcs (1pc emergency light with battery, Ex-type)
Ex sockets (220V 3 PIN European style), 5 pcs
MCT (1 pc, Roxtec)
Emergency shutdown - Ex type
Exhaust fans (1pc installed inside fume hood, 1pc installed outside) - Ex type
Phone and network cabling

Air conditioning

One Split Type AC unit - Ex Type (working temperature -20°C / +50°C, T3), 24000BTU

Applicable Codes and Standards

Bureau Veritas or other major IACS Classification Societies

ABS approved offshore laboratory container, negative pressure lab container

2/26/2021

A offshore laboratory contain has potential sources of release such as hydrocarbon liquid and gas samples, and vapors from heated hydrocarbon liquids. Some equipment is not designed for hazardous area which it could present an ignition source. The laboratory container is designed by using external extracting system for the toxic fumes (Ex certified) from the fume cupboard. Other electrical equipment inside the lab container is also certified by Ex approvals, including split-type air conditioner, lighting, sockets, distribution boards, etc. Negative pressure is maintained by using exhaust blower and speically designed air-lock system.

ABS approved offshore lab container

Offshore laboratory container, negative pressure

Negative pressure maintained in the lab container

offshore workshop container, offshore laboratory container, dnv2.7-1 certified, dnv2.7-1/en12079, csc certification

2/1/2021

offshore workshop container, offshore laboratory container, DNV2.7-1 certified

Forward>>

TLS news & blogs